Rmon Event - Allied Telesis x510-28GTX Command Reference Manual

RMON C
OMMANDS

RMON EVENT

rmon event
Overview Use this command to create an event definition for a log or a trap or both. The
event index for this event can then be referred to by the
Use the no variant of this command to remove the event definition.
NOTE
collected.
rmon event <event-index> [description <description>|owner
Syntax
<owner>| trap <trap>]
rmon event <event-index> [log [description <description>|owner
<owner>|trap <trap>] ]
rmon event <event-index> [log trap [description
<description>|owner <owner] ]
no rmon event <event-index>
Default No event is configured by default.
Mode Global Configuration
Example To create an event definition for a log with an index of 299, use this command:
awplus#
awplus(config)#
alfred
To to remove the event definition, use the command:
awplus#
awplus(config)#
Related rmon alarm
Commands
C613-50170-01 Rev B
: Only the events for switch port interfaces, not for VLAN interfaces, can be
Parameter
<event-index>
log
trap
log trap
description<description>
owner <owner>
configure terminal
rmon event 299 log description cond3 owner
configure terminal
no rmon event 299
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
rmon alarm
Description
<1-65535> Unique event entry index value.
Log event type.
Trap event type.
Log and trap event type.
Event entry description.
Owner name to identify the entry.
command.
2681