Show Location - Allied Telesis x510-28GTX Command Reference Manual

LLDP C
OMMANDS

SHOW LOCATION

show location
Overview Use this command to display selected location information configured on the
switch.
show location {civic-location|coord-location|elin-location}
Syntax
show location {civic-location|coord-location|elin-location}
identifier {<civic-loc-id>|<coord-loc-id>|<elin-loc-id>}
show location {civic-location|coord-location|elin-location}
interface <port-list>
Mode User Exec and Privileged Exec
Examples To display a civic address location configured on port1.0.1, use the command:
awplus#
Table 66: Example output from the show location command
To display coordinate location information configured on the identifier 1, use the
command:
awplus#
C613-50170-01 Rev B
Parameter
civic-location
coord-location
elin-location
<civic-loc-id>
<coord-loc-id>
<elin-loc-id>
<port-list>
show location civic-location interface port1.0.1
awplus# show location civic-location interface port1.0.1
Port ID Element Type
----------------------------------------------------------------
1.0.1 1 Country
City
Street-suffix
House-number
Primary-road-name
show location coord-location identifier 1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Display civic location information.
Display coordinate location information.
Display ELIN location information.
Civic address location identifier, in the range 1 to 4095.
Coordinate location identifier, in the range 1 to 4095.
ELIN location identifier, in the range 1 to 4095.
Ports to display information about.
Element Value
NZ
Christchurch
Avenue
27
Nazareth
2665