Debug Ping-Poll - Allied Telesis x510-28GTX Command Reference Manual

P -P C
ING OLLING OMMANDS
-
DEBUG PING POLL

debug ping-poll

Overview This command enables ping poll debugging for the specified ping-poll instance.
This generates detailed messages about ping execution.
The no variant of this command disables ping-poll debugging for the specified
ping-poll.
Syntax debug ping-poll <1-100>
no debug ping-poll {<1-100>|all}
Mode Privileged Exec
Examples To enable debugging for ping-poll instance 88, use the command:
awplus#
To disable all ping poll debugging, use the command:
awplus#
To disable debugging for ping-poll instance 88, use the command:
awplus#
Related active (ping-polling)
Commands
clear ping-poll
ping-poll
show ping-poll
undebug ping-poll
C613-50170-01 Rev B
Parameter Description
<1-100>
A unique ping poll ID number.
all Turn off all ping-poll debugging.
debug ping-poll 88
no debug ping-poll all
no debug ping-poll 88
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2783