Show Rmon Event - Allied Telesis x510-28GTX Command Reference Manual

RMON C
OMMANDS

SHOW RMON EVENT

show rmon event
Overview Use this command to display the events configured for the RMON probe.
NOTE
Syntax show rmon event
Mode User Exec and Privileged Exec
Output Figure 61-1: Example output from the show rmon event command
NOTE
interfaces:
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50170-01 Rev B
: Only the events for switch port interfaces, not for VLAN interfaces, can be shown.
awplus#sh rmon event
event Index = 787
Description TRAP
Event type log & trap
Event community name gopher
Last Time Sent = 0
Owner RMON_SNMP

event Index = 990
Description TRAP
Event type trap
Event community name teabo
Last Time Sent = 0
Owner RMON_SNMP
: The following etherStats counters are not currently available for Layer 3
etherStatsBroadcastPkts
etherStatsCRCAlignErrors
etherStatsUndersizePkts
etherStatsOversizePkts
etherStatsFragments
etherStatsJabbers
etherStatsCollisions
etherStatsPkts64Octets
etherStatsPkts65to127Octets
etherStatsPkts128to255Octets
etherStatsPkts256to511Octets
etherStatsPkts512to1023Octets
etherStatsPkts1024to1518Octets
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2683