Ping-Polling Commands; Introduction; Chapter 64: Ping-Polling Commands - Allied Telesis x510-28GTX Command Reference Manual

64

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
Ping Polling. For more information, see the
Configuration
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Table 64-1: The following table lists the default values when configuring a ping
Command List •
•
•
•
C613-50170-01 Rev B
Guide.
poll
Default
Critical-interval
Description
Fail-count
Length
Normal-interval
Sample-size
Source-ip
Time-out
Up-count
"active (ping-polling)" on page 2780
"clear ping-poll" on page 2781
"critical-interval" on page 2782
"debug ping-poll" on page 2783
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Ping-Polling
Commands
Ping Polling Feature Overview and
Value
1 second
No description
5
32 bytes
30 seconds
5
The IP address of the interface from which the ping packets are
transmitted
1 second
30
"Getting Started
Guide.
2778