Normal-Interval - Allied Telesis x510-28GTX Command Reference Manual

P -P C
ING OLLING OMMANDS
-
NORMAL INTERVAL

normal-interval

Overview This command specifies the time period between pings when the device is
reachable.
The no variant of this command resets the time period to the default of 30 seconds.
Syntax normal-interval <1-65536>
no normal-interval
Default The default is 30 seconds.
Mode Ping-Polling Configuration
Examples To specify a time period of 60 seconds between pings when the device is reachable
for ping-poll instance 45, use the commands:
awplus#
awplus(config)#
awplus(config-ping-poll)#
To reset the interval to the default of 30 seconds for ping-poll instance 45, use the
commands:
awplus#
awplus(config)#
awplus(config-ping-poll)#
Related critical-interval
Commands
fail-count
ping-poll
sample-size
show ping-poll
timeout (ping polling)
up-count
C613-50170-01 Rev B
Parameter Description
<1-65536>
Time in seconds between pings when the target is reachable.
configure terminal
ping-poll 45
configure terminal
ping-poll 45
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
normal-interval 60
no normal-interval
2788