Show Rmon Alarm - Allied Telesis x510-28GTX Command Reference Manual

RMON C
OMMANDS

SHOW RMON ALARM

show rmon alarm
Overview Use this command to display the alarms and threshold configured for the RMON
probe.
NOTE
shown.
Syntax show rmon alarm
Mode User Exec and Privileged Exec
Example To display the alarms and threshold, use this command:
awplus#
Related rmon alarm
Commands
C613-50170-01 Rev B
: Only the alarms for switch port interfaces, not for VLAN interfaces, can be
show rmon alarm
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2682