Debug Sflow Agent - Allied Telesis x510-28GTX Command Reference Manual

F C
S LOW OMMANDS

DEBUG SFLOW AGENT

debug sflow agent
Overview This command enables sFlow® debug message logging that is not specific to
particular ports. For example, sending an sFlow datagram to the collector.
The no variant of this command applies the command default.
Syntax debug sflow agent
no debug sflow agent
Default The sFlow agent debug message logging (that is not port specific) is disabled.
Mode Privileged Exec
Example To enable logging of sFlow agent debug messages, use the following command:
awplus#
Related show debugging sflow
Commands
debug sflow
C613-50170-01 Rev B
debug sflow agent
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2805