Active (Trigger) - Allied Telesis x510-28GTX Command Reference Manual

T C
RIGGER OMMANDS
( )
ACTIVE TRIGGER

active (trigger)

Overview This command enables a trigger. This allows the trigger to activate when its trigger
conditions are met.
The no variant of this command disables a trigger. While in this state the trigger
cannot activate when its trigger conditions are met.
Syntax active
no active
Mode Trigger Configuration
Usage Configure a trigger first before you use this command to activate it.
For information about configuring a trigger, see the
Configuration
Examples To enable trigger 172, so that it can activate when its trigger conditions are met,
use the commands:
awplus#
awplus(config)#
awplus(config-trigger)#
To disable trigger 182, preventing it from activating when its trigger conditions are
met, use the commands:
awplus#
awplus(config)#
awplus(config-trigger)#
Related show trigger
Commands
trigger
C613-50170-01 Rev B
Guide.
configure terminal
trigger 172
active
configure terminal
trigger 182
no active
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Triggers Feature Overview and
2741