Ip (Ping-Polling) - Allied Telesis x510-28GTX Command Reference Manual

P -P C
ING OLLING OMMANDS
( - )
IP PING POLLING

ip (ping-polling)

Overview This command specifies the IPv4 address of the device you are polling.
ip {<ip-address>|<ipv6-address>}
Syntax
Mode Ping-Polling Configuration
To set ping-poll instance 5 to poll the device with the IP address 192.168.0.1,
Examples
use the commands:
awplus#
awplus(config)#
awplus(config-ping-poll)#
To set ping-poll instance 10 to poll the device with the IPv6 address 2001:db8::,
use the commands:
awplus#
awplus(config)#
awplus(config-ping-poll)#
Related ping-poll
Commands
source-ip
show ping-poll
C613-50170-01 Rev B
Parameter Description
<ip-address> An IPv4 address in dotted decimal notation A.B.C.D
<ipv6-address> An IPv6 address in hexadecimal notation X:X::X:X
configure terminal
ping-poll 5
configure terminal
ping-poll 10
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
ip 192.168.0.1
ip 2001:db8::
2786