Subaru XT 1988 Service Manual page 150

2-2 ON-CAR SERVICES
Specified torque:
64
N·m
(6.5
kg-m,
47
ft-Ib)
Tool Part No. Tool Part Name
499987200
Socket wrench (17)
5) Similarly, retighten each bolt in sequence from
®
to
®
as shown in Figure.
Finally, retighten bolt
CD
to the specified torque without
loosening.
6) After retightening right and left cylinder head bolts,
tighten mounting bolts of intake manifolds.
Oil Pump Assembly
1800
cc
model
REMOVAL
1) Open the front hood.
2) Disconnect the ground cable from the battery.
3) Position the lift arm and raise the vehicle with a jack.
4) Remove the undercovers.
5) Remove the bolts from the lower side of the radiator fan
shroud.
Fig. 13
6) Lower the vehicle.
7)
Remove the radiator fan shroud.
(1) Disconnect the fan motor connector.
(2) Remove the bolts from the upper side of the shroud.
Fig. 14
8) Remove the alternator and V-belt.
Fig. 15
10