Connecting Aj65Bt-R2N - Mitsubishi Electric GT16 User Manual

(3) Operation setting DIP switch
Operation setting Setting
Description
DIP switch Switch
SW1, Operation
SW6 mode
Peripheral
SW2
transmissio
SW3
n speed
SW4
SW5 Not used
SW7
SW8 Test mode
: Necessary
*1 The peripheral connection module operates with the baud
rate set in the GOT.
23.5.6 [Controller Setting] of GT Designer3
POINT POINT POINT
Operation mode of peripheral connection module
Be sure to set the "Q mode" as an operation mode of
the peripheral connection module.
Setting
necessity
Set value
at GOT
connection
SW1 = OFF
SW6 = ON
(fixed)
(Q mode)
OFF (fixed)
*1
OFF (fixed)
OFF (fixed)
(Online mode)
: As necessary : Not necessary

23.5.2 Connecting AJ65BT-R2N

This section describes the settings of the GOT and
peripheral connection module in the following case of the
system configuration.
POINT POINT POINT
(1) Peripheral connection module
For details of the peripheral connection module,
refer to the following manual.
Peripheral Connection Module Type AJ65BT-
R2N User's Manual
(2) CC-Link module
For details of the CC-Link module, refer to the
following manual.
CC-Link System Master/Local Module User's
Manual QJ61BT11N
MELSEC-L CC-Link System Master/Local
Module User's Manual
(3) CC-Link function built-in CPU
For details on the CC-Link function built-in CPU,
refer to the following manual.
MELSEC-L CC-Link System Master/Local
Module User's Manual

System configuration
23.5.3 Switch setting of CC-Link module (Q series)
23.5.4 [Network parameter] of GX Developer
<CC-Link module> *1
Station type
Station No.
Mode
All connect count
Transmission speed
<AJ65BT-R2N>
Station type
Station No.
Number of stations occupied
Transmission speed
■ Switch setting of peripheral connection module
*1 The Start I/O No. of the CC-Link module is set to "0"
23. CC-Link CONNECTION (Via G4)
23.5 PLC Side Setting
Setting example
: Master station
: Station No. 0
: Remote net (Ver.1 mode)
: 1
: 156kbps
23.5.6 [Controller Setting] of GT Designer3
<GOT>
Setting example
Transmission speed: 9600bps
Setting example
: Intelligent device station
: Station No. 1
: Exclusive station 1
: 156kbps
23 - 9
20
21
22
23
24
25
26
27