Overview Of Communication Cable - Mitsubishi Electric GT16 User Manual

8. COMMUNICATION CABLE

8.1 Overview of Communication Cable

The following communication cables are available.
Wiring of power supply,
Controller
emergency stop switch,
operation switch, etc.
Communication with PLC,
temperature controller,
inverter, servo amplifier, etc.
• External cable
• PLC connection cable
Name
External cable
PLC connection cable
(for connecting between PLCs and
Connecter Conversion Box)
Connector Conversion Box
PLC connection cable
: This cable connects Handy GOT and the Connector Conversion Box.
This cable is required for using the Handy GOT.
: A cable which connects a Connector Conversion Box and a controller.
There are several types which can be selected according to a controller.
However, this cable must be prepared by the user depending on the controller to be
used.
Model name
GT16H-C30-42P
GT16H-C60-42P
GT16H-C100-42P
Select or prepare appropriate cables for the communication method and controllers.
External cable
Length
3m
6m Connector conversion connection side 42 pins
10m
8. COMMUNICATION CABLE
8.1 Overview of Communication Cable
Handy GOT
Remark
8 - 1
1
2
3
4
5
6
7
8