Bootos And Standard Monitor Os Required For Installation - Mitsubishi Electric GT16 User Manual

16.1 BootOS and Standard Monitor OS Required for
Installation
Under-mentioned BootOS and Standard monitor OS are necessary to execute utility.
OS
name
Required for the control of GOT and the communication between PC and GOT.
Installed at factory shipment.
BootOS
(BootOS can be installed from GT Designer3 or the CF card. When installed from GT
Designer3 or the CF card, GOT is initialized to be the factory shipment status.
Required for the GOT operation as the
monitoring function of GOT, installation and
deletion of the OS file or project data, touch key
control or display function of the screen and
guidance.
Standard
System screen data
monitor
System screen management information file
OS
TrueType numerical font
12-dot standard font (Gothic)
16-dot standard font (Mincho)
16-dot standard font (Gothic)
16 - 2
16. INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS

16.1 BootOS and Standard Monitor OS Required for Installation

Function overview
Required for display and operation of
the user-created screen and utility
screen.
Not installed in GOT at factory
shipment.
Install it from GT Designer3, or the CF
card or USB memory.
At installation, select [Mincho] or
[Gothic] for the 16-dot standard font.
Storage location
Built-in flash memory
C: \G1BOOT\
CF card that stores data with
the OS boot drive set to the A
drive
A:\G1BOOT\
Built-in flash memory
C:\G1SYS\
CF card that stores data with
the OS boot drive set to the A
drive
A:\G1SYS\