Mitsubishi Electric GT16 User Manual page 704

Item Description
Set the subnet mask for the sub
network. (Only for connection via
router)
Subnet Mask
If the sub network is not used,
the default value is set.
(Default: 255.255.255.0)
Set the router address of the
default gateway where the GOT
Default
is connected. (Only for
Gateway
connection via router)
(Default: 0.0.0.0)
Ethernet Set the GOT port No. for
Download Port Ethernet download.
No. (Default: 5014)
Click the [OK] button when settings are completed.
POINT POINT POINT
(1) Setting the FA transparent function of GX Works2
When connecting the GOT and the personal
computer in Ethernet connection, set the GOT IP
address and the Ethernet download port No. to the
same as the contents of PLC side I/F detailed
setting of GOT.
31.6.4 Accessing by GX Works2
(2) Communication interface setting by Utility
The communication interface setting can be
changed on the Utility's [Communication Settings]
after downloading [Communication Settings] of
project data.
For details on the Utility, refer to the following.
12. COMMUNICATION INTERFACE SETTING
(COMMUNICATION SETTING)
(3) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
31 - 28
31. FA TRANSPARENT FUNCTION
31.5 GOT Side Settings
Range

When using the multi-channel function, specify the channel
0.0.0.0 to
No. on which FA transparent function is executed.
255.255.255.255
0.0.0.0 to
255.255.255.255
1024 to 5010,
5014 to 65534
(Except for 5011,
5012, 5013 and
49153)
1.
2.
3.
4.
Click the [OK] button when settings are completed.
POINT POINT POINT
GOT Setup
2.
Select [Common] [GOT Environmental Setting]
[GOT Setup] from the menu.
Check [Enable GOT Setup].
Select the [Transparent] tab.
As necessary, check one of [CH1] to [CH4].
(Default: CH1)
Transparent setting on the utility screen
Transparent setting can be performed by the GOT.
For details of the operating, refer to the following.
11.1.2Transparent setting (Transparent mode
setting)
3. 4.
Click!