Mitsubishi Electric GT16 User Manual page 927

Got1000 series
Hide thumbs Also See for GT16:
Table of Contents

Advertisement

45.4 GOT Side Settings
45.4.1
Setting communication interface
(Communication settings)
Set the channel of the connected equipment.
2.
1.
Select [Common]
[Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: HITACHI
• Controller Type: HITACHI HIDIC H
• I/F: Interface to be used
• Driver: Set either of the following.
• HITACHI HIDIC H
• HITACHI HIDIC H (Protocol2)
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
45.4.2 Communication detail settings
Click the [OK] button when settings are completed.
POINT
POINT
POINT
The settings of connecting equipment can be
confirmed in [I/F Communication Setting].
For details, refer to the following.
17.1.2 I/F communication setting
45.4.2 Communication detail settings
Make the settings according to the usage environment.
(1) HITACHI HIDIC H
Item
Transmission
Speed
3.
Data Bit
4.
Stop Bit
Parity
Click!
Retry
Timeout Time
Delay Time
Station No.
Selection
45. CONNECTION TO HITACHI IES PLC
Description
Set this item when change the
transmission speed used for
communication with the connected
equipment.
(Default: 19200bps)
Set this item when change the data
length used for communication with
the connected equipment.
(Default: 7bits)
Specify the stop bit length for
communications.
(Default: 1bit)
Specify whether or not to perform a
parity check, and how it is performed
during communication.
(Default: Even)
Set the number of retries to be
performed when a communication
error occurs.
(Default: 0time)
Set the time period for a
communication to time out.
(Default: 3sec)
Set this item to adjust the
transmission timing of the
communication request from the
GOT.
(Default: 0ms)
Specify whether to use the station No.
during communication.
If [Yes] is selected, the station No. is
fixed to "0."
(Default: Yes)
45.4 GOT Side Settings
44
45
Range
4800bps,
9600bps,
19200bps,
38400bps
46
7bit (fixed)
1bit (fixed)
47
Even (fixed)
0 to 5times
3 to 30sec
48
0 to 300 (ms)
Yes or No
49
50
51
45 - 5

Advertisement

Table of Contents
loading

Table of Contents