When The Coreos Cannot Be Installed - Mitsubishi Electric GT16 User Manual

Got1000 series
Hide thumbs Also See for GT16:
Table of Contents

Advertisement

16.5.2 When the CoreOS cannot be installed

When the CoreOS cannot be installed, confirm the following item.
If the CoreOS cannot be installed even after checking the following item, the error may be caused by a hardware failure.
Please consult your local Mitsubishi (Electric System) Service center or representative.
The CoreOS installation is not executed even when installing
the CF card in the GOT.
GOT error. Contact your local sales office.
CF card error.
Installation will be cancelled.
Check whether the CF card can be used.
The
GOT type and OS version do not match.
message is
Installation will be canceled.
displayed on
the GOT
The version of OS is not acceptable to this
GOT.
Installation will be canceled.
Confirm the version of OS.
Memory card access switch is off.
Turn on the switch and restart the GOT.
Installation will be canceled.
16 - 14
16. INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS
16.5 CoreOS
Error
(1) Check whether the CF card access switch of the GOT is on.
If the switch is off, switch it on.
(2) The writing from the GT Designer3 to the CF card may not have
been completed normally.
Execute the writing from the GT Designer3 to the CF card again.
The GOT main unit is broken.
Please consult your local Mitsubishi (Electric System) Service center
or representative.
The CF card is defective.
(1) Format the CF card and re-execute.
(2) Replace the CF card.
The GOT type selected at [Core OS write] of the GT Designer3 is not
correct.
Confirm the GOT type and perform [Core OS write] again.
Install CoreOS from the latest GT Designer3.
The CF card access switch is off. Turn the switch on and restart the
GOT.
Action

Advertisement

Table of Contents
loading

Table of Contents