Prior Preparations For Installing Bootos And Standard Monitor Os - Mitsubishi Electric GT16 User Manual

16.2 Prior Preparations for Installing BootOS and
Standard Monitor OS
For the installation using GOT, the CF card or USB memory storing BootOS or standard monitor OS is required.
For the method of writing BootOS and standard monitor OS in the CF card or USB memory, the following three methods
are available.
(1) [To Memory Card] from GT Designer3
GT Designer3 Version1 Screen Design Manual (Fundamentals)
(2) Uploading from other GOT (BootOS or standard monitor OS has been installed)
15. DATA CONTROL
(3) Using CF card that stores data with OS boot drive set to A drive
GT Designer3 Version1 Screen Design Manual (Fundamentals)
POINT POINT POINT
Precautions on writing BootOS, standard monitor OS in CF card or USB memory
When writing BootOS, standard monitor OS, etc. in the CF card or USB memory, be sure to execute by the utility of
other GOT, GT Designer3.
The installation is not executed properly with the CF card or USB memory to which uploaded from the utility of GOT
or copied by softwares other than GT Designer3.
Note the available capacity of the CF card or USB memory.
The available capacity of BootOS and standard monitor OS can be confirmed by [To Memory Card] of GT
Designer3.
16. INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS

16.2 Prior Preparations for Installing BootOS and Standard Monitor OS

Capacity of standard monitor OS
Available space of the CF card
or USB memory
9
10
11
12
13
14
15
16
16 - 3