Mitsubishi Electric GT16 User Manual page 190


Channel number setting operation
Keyboard

Communication detail setting switching operation
If the driver display BOX is touched on the communication setting screen or Ethernet I/F assign screen, the screen
switches to the detailed setting screen of the related controller device.
( 12.2 Communication Detail Setting)

5V power supply setting operation
GT16 Handy cannot provide 5VDC power to the controllers from the RS-232 interface regardless of the setting of the
5V power provision.
12 - 6
12. COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
12.1 Communication Setting
1.
Touch channel number specification menu BOX
to be set.
2.
The cursor for the channel number specification
menu BOX is displayed.
Simultaneously the keyboard for a numerical
input is displayed.
3.
Input the channel number from the keyboard and
touch [Enter] key, and the value is defined.
Simultaneously, the name of the communication
driver corresponding to the channel number
assigned by GT Designer3 is displayed in the
driver display BOX.