Got Side Settings - Mitsubishi Electric GT16 User Manual

53.4 GOT Side Settings

53.4.1 Setting communication interface
(Communication settings)
Set the channel of the connected equipment.
2.
1.
Select [Common]
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: RKC
• Controller Type: RKC SR Mini HG
• I/F: Interface to be used
• Driver: RKC SR Mini HG(MODBUS)
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
53.4.2 Communication detail settings
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be
confirmed in [I/F Communication Setting].
For details, refer to the following.
17.1.2 I/F communication setting
53 - 14
53. CONNECTION TO RKC TEMPERATURE CONTROLLER
53.4 GOT Side Settings
3.
4.
Click!
[Controller Setting] from the
53.4.2 Communication detail settings
Item Description
Set this item when change the
transmission speed used for
Transmission
communication with the connected
Speed
equipment.
(Default: 9600bps)
Set this item when change the data length
used for communication with the
Data Bit
connected equipment.
(Default: 8bits)
Set this item when change the data length
used for communication with the
Stop Bit
connected equipment.
(Default: 1bit)
Specify whether or not to perform a parity
check, and how it is performed during
Parity
communication.
(Default: No)
Set the number of retries to be performed
Retry when a communication error occurs.
(Default: 0time)
Set the time period for a communication to
Timeout Time time out.
(Default: 3sec)
Set this item to adjust the transmission
timing of the communication request from
Delay Time
the GOT.
(Default: 0ms)
Select the communication format.
(Default: 1)
Format 1:
Accessible to H-PCP-J, H-PCP-A,
Format H-PCP-B, SRZ, FB, PF, HA, MA, RMC,
SRX series
Format 2:
Accessible to CB, RB, AG, THV, SA, SB,
B400 series
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following.
12. COMMUNICATION INTERFACE SETTING
(COMMUNICATION SETTING)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
Range
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
7bits/8bits
1bit/2bits
None
Even
Odd
0 to 5times
3 to 30sec
0 to 300ms
1/2