Cnc Side Settings; Ethernet Connection - Mitsubishi Electric GT16 User Manual

27.5 CNC Side Settings

27.5.1 Ethernet connection


System configuration
The following shows the example of the system
configuration when using the CNC monitor function.
<CNC-2>
N/W No. :239
PLC No. :3
IP address :192.168.1.3
Ethernet (192.168.1.xx)
<CNC-1>
[Communication with GOT]
N/W No. :239
PLC No. :2
IP address :192.168.1.2
27 - 6
27. CNC CONNECTION
27.5 CNC Side Settings
<GOT>
N/W No. :1
PLC No. :1
IP address :192.168.1.1

Parameter setting
Set parameters related to Ethernet with MELSEC's
peripheral devices in the same way as parameter
setting of MELSEC CPU, and write them on CNC by
PC.
(1) Network parameter setting
Set the network parameters by peripheral device and
write them on CNC. An example of parameter setting
by GPPW is as follows. Set the first I/O No. as follows
according to the expansion slot to which the unit is
inserted.
(a) Unit No.
Start
Slot
I/O Mounting position of extension unit
position
No.
EXT1 0200
When mounted
in EXT1 and EXT2
EXT2 0280
EXT3 0300
Unit2
Unit1
When mounted
in EXT2 and EXT3
EXT3
Unit2 Unit1
When mounted
in EXT2 only
Unit1
When mounted
in EXT1 and EXT3
EXT2
EXT3
EXT1 EXT1
Unit2
Unit1
When mounted
in EXT1 only
EXT2
EXT1
Unit1
When mounted
in EXT3 only
EXT3
EXT2
Unit1