Mitsubishi Electric GT16 User Manual page 606

HINT HINT HINT
(1) Automatic setting with Pr.999
If Pr.999 is set as the following, the communication settings other than [PU communication station number]
and [Communication EEPROM write selection] can be automatically set in a batch to the default
communication settings of the GOT side.
Parameter No.
Pr.999
*1 When monitoring the value of Pr.999, 9999 is always monitored.
(2) Inverters available for automatic batch setting
Parameters are not automatically set in a batch depending on the SERIAL (production number) symbol of the
inverter to be used. For details, contact your local distributor.
24 - 22
24. INVERTER CONNECTION
24.5 FREQROL Series Inverter Side Settings
Set value
10
*1
11 GOT Initial settings (RS-485)
Description
GOT Initial settings
(PU connector)
Operation in parameter setting mode
[AUTO] [GOT] [1]Write
-