Mitsubishi Electric GT16 User Manual page 710

4.
Double-click [GOT] of the PLC side I/F to display
[PLC side I/F Detailed Setting of GOT].
5.
On the [PLC side I/F Detailed Setting of GOT], mark
the [via GOT (Ethernet) transparent mode] checkbox
and click [Setting].
6.
By clicking [Setting], the [GOT (Ethernet) Transparent
Setting] is displayed.
Here, set the built-in Ethernet port CPU, which is
firstly connected via a GOT.
7.
Set [Ethernet Built-in CPU] for [PLC Type].
31 - 34
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
8.
Specify the number for [Network No.] and [Station
No.] same as the number assigned to the Ethernet
module.
9.
Specify the IP address for [IP Address] same as the
IP address assigned to the built-in Ethernet port
QCPU or Ethernet module.
Successfully connected with the R12CCPU-V
10.
The screen returns to the [Connection Channel
Setup]. Click [Connection Test] to check if GX Works3
has been connected to the R12CCPU-V.