Monitor Screens - Mitsubishi Electric GT16 User Manual

13. DEBUG
In this manual, the overview of the debuggingfunction and the operation procedure until displaying the screen are
described.
For display contents and operation procedure of debuggings, refer to the following manual.
The following describes the functions available as the debugging function.
Item

Monitor screens

Debug setting
Memory/data control
13.1 Monitor Screens
13.1.1 Function of monitor screens
The Monitor screens are designed to confirm the device status of PLC CPU and to make the response for PLC system
trouble more efficient.
The following shows the functions that can be performed with the Monitor screens.
Item
System monitor The device of PLC CPU and buffer memory of intelligent function module can be monitored or tested.
Ladder monitor The program of PLC CPU can be monitored in ladder format.
The network status of the MELSECNET/H, MELSECNET(II), and CC-Link IE Controller Network can be
Network monitor
monitored.
Intelligent unit Buffer memory in the intelligent function module can be monitored or the data can be changed on the
monitor dedicated screen. And the signal status of I/O modules can be monitored.
Servo amplifier
Various monitor functions, parameter change, test operation, etc. of the servo amplifier are available.
monitor
Motion monitor The servo monitoring and parameter settings of the motion controller CPU (Q series) are available.
CNC monitor This function is not available for GT16 Handy.
A list editor The sequence program of ACPU can be list edited.
FX list editor The sequence program of FXCPU can be list edited.
The GOT can monitor and display SFC programs of the PLC CPU in the SFC diagram format (MELSAP3 or
SFC Monitor
MELSAP-L format).
Ladder editor The sequence program of PLC CPU can be edited.
MELSEC-L
The status of MELSEC-L CPU and buttons for functions related to the troubleshooting are displayed.
troubleshooting
Logging data obtained through a high speed data logger module and LCUP can be browsed and the logging
Log viewer
data can be retrieved via GOT.
Motion SFC monitor Motion SFC program and device values in the Q series motion controller CPU can be monitored.
Motion program
This function is not available for GT16 Handy.
(SV43) editor
GOT1000 Series Extended/Option Functions Manual for GT Works3
System monitor, Ladder monitor, Network monitor, intelligent module monitor, servo
amplifier monitor, Motion monitor, A list editor, FX list editor, SFC monitor, Ladder editor,
MELSEC-L troubleshooting, Log viewer, Motion SFC
Q/L/QnA ladder monitor setting, Backup/restoration setting
Backup/restoration function, GOT data package acquisition, CNC data I/O, Memory card
format, Memory information, USB device status display, SRAM control, Motion program
(SV43) I/O
Description
Description
13.1 Monitor Screens
Reference
13-1
13-3
13-9
13 - 1
13. DEBUG
9
10
11
12
13
14
15
16