Mitsubishi Electric GT16 User Manual page 323

(d) For changing passwords during editing, touch the
password.
The New password input dialog box is displayed,
and then input a password.
When the input is completed, touch the [Enter] key.
When the password input is completed, the New
password input confirmation dialog box is
displayed.
Input the same password.
(e) For enabling the setting of [Make a permanent
password], touch the check box for [Make a
permanent password], and then the setting is
switched.
: Disabled
: Enabled
3.
Touch the [OK] button after all items are input, and
then the dialog box shown left is displayed and the
input operator information is added.
Touch the [Cancel] button or the
the dialog box shown left is displayed.
15. DATA CONTROL
15.2 Various Data Control
9
10
11
12
13
button, and then
14
15
16
15 - 75