Mitsubishi Electric GT16 User Manual page 345

(5) Data check operation
Carrys out data check of the selected project file.
Dialog at data check normal
Dialog at data check abnormal
(6) Download operation/setup operation
(a) Download operation
Transfers the project data stored in the A drive (Standard CF Card) or E drive (USB drive) to the C drive
(Built-in flash memory). (The GOT monitors using the data in the C drive.)
(This item explains using the A drive.)
POINT POINT POINT
Before download operation
(1) Setup cancel
When the project data in the A drive is set up, the project data cannot be downloaded to the C drive.
Execute setup cancel (
(2) Project data to be stored in a CF card
When storing the project data from GT Designer3 to CF card, select [C: Built-in flash memory] for [Project
Data] in the [Boot Drive].
1.
Touch the [Data check] button after selecting the file
for data check.
The data check is executed and the result is
displayed by the dialog box shown left.
2.
If touch [OK] button, the dialog box is closed.
(7)(b) Setup cancel operation) before downloading the project data.
15. DATA CONTROL
15.3 OS/Project Information
9
10
11
12
13
14
15
16
15 - 97