5.
Set the status observation function.
• Operation trigger setting
Set the GOT internal device GB40 (always ON during the GOT operation) as the conditional trigger of the status
observation function.
(1) If [Common]
[Status Observation...] from the menu is selected, the Status Observation dialog box is
displayed.
(2) Set [Ordinary] to Observation Cycle in the Project tab and click [Add...].
(3) Set [ON] and [GB40] to Trigger 1 in the Trigger tab.
6. OPTION
6.7 Connector Conversion Box
1
2
3
4
5
6
7
8
6 - 21