Switch Wiring - Mitsubishi Electric GT16 User Manual

9.4 Switch Wiring

9.4.1 Overview for switch
Operation switch display LED
No. Name
(1) Operation switch (6 switches)
(2) Emergency stop switch
(3) Grip switch
(4) Keylock switch (2-position SW)
Switch
The following switches require the connection to a PLC or a
controller through an external cable.
• Operation switch
• Emergency stop switch
• Grip switch
• Keylock switch (2-position SW)
(2)
(1)
Abbreviations
SW1 to SW6
ES-1,ES-2,ES-3
DSW-1,DSW-2
KSW-1,KSW-2
9. HANDLING OF POWER WIRING AND SWITCH
(4)
(3)
Grip switch display LED
Specifications
Switch for external direct wiring (independent contact)
Switch for external direct wiring (independent contact)
Switch for external direct wiring (independent contact)
Switch for external direct wiring (independent contact)
LED
The following LED is turned ON/OFF in the serial communication
with a controller.
The independent wiring to control the LED is not required.
• Operation switch display LED
• Grip switch display LED
9.4 Switch Wiring
9
10
11
12
13
14
15
16
9 - 9