Mitsubishi Electric GT16 User Manual page 343

(3) Copy operation
Uploads the project data written in the C drive (Built-in flash memory) to the A drive (Standard CF card) / E drive
(USB drive).
• Copying to another directory in the same drive
• Copying between A drive and E drive
Copy to/from C drive is disabled.
(This item explains using the A drive.)
1.
Install CF card in the PC, in which create a folder for
the copy destination.
Set the same character with [System Setting] of
[System Environment] of GT Designer3 for the folder
name.
GT Designer3 Version1 Screen Design
Manual (Fundamentals)
2.
Install the CF card mentioned above to GOT.
Refer to the following for inserting/ removing method
of CF card.
6.1.2 Installing and removing procedures of
the CF card
6.3.2 Installing and removing procedures of
the USB memory
3.
Open [Project Information] screen to select the file to
copy.
4.
If touch [Copy] button, the message [Please select a
destination.] is displayed in the left bottom of the
screen.
5.
If the copy destination folder is touched, the screen
display is changed to the folder of copy destination.
At this time, it cannot be copied into the same folder
where the file exists.
Select other folders.
6.
If touch [Exec.] button, the dialog box mentioned left
is displayed.
15. DATA CONTROL
15.3 OS/Project Information
9
10
11
12
13
14
15
16
15 - 95