Mitsubishi Electric GT16 User Manual page 267

(3) CSV/TXT G1P conversion operation
CSV file or Unicode text file is converted to an advanced recipe file (G1P file).
1.
To select the file, touch the check box of CSV file
or Unicode text file to be converted to a G1P file.
2.
Touch the [CSV/TXT->G1P] button to display
[Please select destination] at the lower left corner
of the screen.
3.
Select the target folder.
(Selecting a folder is not needed for outputting
directly below the drive.)
4.
Touch the [Excute] button to display the dialog box
shown left.
Touch the [OK] button.
(While executing, "Processing..." message
appears on the screen.)
5.
When the file, whose name is the same, exists in
the destination folder, the dialog box shown left
appears without starting the conversion.
To overwrite the file, touch the [OK] button.
To cancel the conversion, touch the [Cancel]
button.
6.
The completion message appears in the dialog
box when the conversion is completed.
To close the dialog box, touch the [OK] button.
15. DATA CONTROL
15.2 Various Data Control
9
10
11
12
13
14
15
16
15 - 19