Mitsubishi Electric GT16 User Manual page 736

3.
Set the [Transfer Setup]:
PLC side I/F : GOT
Other station : No specification
4.
Double-click [GOT] of the CPU side I/F to display
[CPU side I/F Detailed Setting of GOT].
5.
Mark the [via GOT (Ethernet) transparent mode]
checkbox on the [CPU side I/F Detailed Setting of
GOT] screen.
6.
By clicking [Set], the [GOT (Ethernet) Transparent
Setting] is displayed.
Here, set the C Controller module (Q Series)
(Q24DHCCPU-V), which is firstly connected via a
GOT.
31 - 60
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
7.
Specify the IP address for [IP address] same as the
IP address assigned to the C Controller module
(Q24DHCCPU-V).
8.
The screen returns to [Transfer Setup]. Click
[Connection Test] to check if Setting/Monitoring tool
for C Controller module has been connected to the C
Controller module (Q Series) (Q24DHCCPU-V).