Got Main Unit Function Settings - Mitsubishi Electric GT16 User Manual

11. DISPLAY AND OPERATION
SETTINGS (GOT SET UP)
Setting screen for display and setting screen for operation can be displayed from the GOT utility screen.
In the setting screen for display and the setting screen for operation, the following settings can be set.
Item
Time setting Clock setting, clock display, GOT internal battery voltage status
Transparent mode Ch No.
Clean Cleaning the display section
Video/RGB Setting
These functions are not available for GT16 Handy.
Multimedia setting
Setting the GOT operation when a device with the same IP address as that of the GOT is added to the network
Behavior of duplicate IPs
afterwards.
License management license registration/deregistration
Language, opening screen time, screen save time, screen save backlight, battery alarm display
Display
Adjusting the brightness and contrast
Buzzer volume, window move buzzer volume, Key sensitivity, Key reaction speed, Touch detection mode
Security setting
Utility call key
Touch panel calibration
Operation
USB mouse/keyboard setting
SoftGOT-GOT link function
VNC
Maintenance timing setting
Addition times reset
GOT maintenance
GOT start time
GOT information

11.1 GOT Main Unit Function Settings

11.1.1 Time setting

Time setting functions
Time setting and displaying of the status of GOT built-in battery are possible.
Item
Time setting
Clock display
GOT internal battery voltage status
POINT POINT POINT
Changing times
When the time is changed on the Time setting & display screen, the changed time is written in a programmable
controller even though [Adjust] or [Broadcast] is set for [Time setting].
As a result, the time of the programmable controller can be changed on the GOT even though [Adjust] is set for
[Time setting].
(The clock data of the controller set as [Adjust CH No.] of [Clock data GOT is matched to clock data External
(Adjust)] in [GOT Setup] ([Clock Setting]) of GT Designer3 is changed.)
For details of [Adjust] and [Broadcast], refer to the following manual.

server function setting
Setup the method to adjust the time between GOT clock data and clock data of controller connected
to the GOT.
Carry out the display and setup of GOT clock data.
Displays GOT internal battery voltage status.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
11. DISPLAY AND OPERATION SETTINGS (GOT SET UP)
Description
Description
11.1 GOT Main Unit Function Settings
9
10
Reference
11-1
11-5
11-6
-
11
11-8
11-11
11-13
11-17
11-18
11-21
11-23
11-25 12
11-27
11-29
11-32
11-34
11-36
11-38
11-40
13
14
Reference
11-2
11-4
11-4
15
16
11 - 1