Mitsubishi Electric GT16 User Manual page 733


Connecting the GOT and Controller in
Ethernet connection
1.
Right-click a project name to be a target on the
project tree of RT ToolBox2.
Click [Edit Project].
2.
Set [Method] to [CRnQ].
3.
Click [Detail].
4.
Check-mark the following in [Serial port].
When connecting the GOT and PC with USB
Mark the [USB] checkbox.
5.
Click [Detail].
6.
Check-mark the following in [PLC side I/F setting of
PLC module].
Ethernet connection
[via GOT(Ethernet) transparent mode]
7.
Click [Setting].
The [GOT(Ethernet) Transparent setting] dialog box
is displayed.
8.
Set [Type] to [QJ71E71].
9.
Specify the number for [Network No.], [Station No.]
and [IP Address] of [Unit] same as the number
assigned to the Ethernet module.
10.
Specify the number for [Network No.] and [Station
No.] of [GOT] same as the number assigned to the
GOT.
11.
Return to the [CRnQ communication detail setting]
screen and set the target CPU in [Target CPU], as
needed.
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
28
29
30
31
32
33
34
35
31 - 57