Got Multi-Drop Connection; Connectable Model List - Mitsubishi Electric GT16 User Manual

29. GOT MULTI-DROP CONNECTION

29.1 Connectable Model List

The following table shows the [Controller Type] and [Communication driver] of GT Designer3 for which the GOT multi-
drop connection is available.
GOT multi-drop connection is available with the following controllers compatible with GT10.
For the connection between the Serial Multi-Drop Connection Unit and PLC, refer to the following manual.
GOT1000 Series Connection Manual (Mitsubishi Products) for GT Works3
GOT type
Connection type
DIRECT
CONNECTION TO
CPU
COMPUTER LINK
CONNECTION
DIRECT
CONNECTION TO
CPU
POINT POINT POINT
GOT Multi- Drop Connection
When using the GOT multi-drop connection, the writing of the standard monitor OS and communication driver to
the GOT from GT Designer3 (Version 1.12N or later), as well as the writing of the standard monitor OS and
communication driver to the serial multi-drop connection unit are required.
For details of the OS installation, refer to the following.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
PLC Serial Multi-Drop Connection Unit
Type
MELSEC-QnU/DC, Q17nD/M/NC/DR, CRnD-700
MELSEC-QnA/Q/QS, MELDAS C6*
MELSEC-Q(MULTI)/Q MOTION
MELSEC-L
MELSEC-A
MELSEC-FX
Serial Multi-Drop Connection driver
Serial (MELSEC)
29. GOT MULTI-DROP CONNECTION
29.1 Connectable Model List
MELSEC-A
MELSEC-FX
29 - 1
28
29
30
31
32
33
34
35