Utility Call Key Setting Operation - Mitsubishi Electric GT16 User Manual



Utility call key setting operation

POINT POINT POINT
(1) When the utility call key is set to the zero point
Even when the utility call key is set to the zero point, you can display the main menu using either of the
following two operations:
• Pressing the special function switch set on the user-created screen
• Pressing the S-mode switch while the [Booting...] message which appears immediately after powering up is
displayed.
(2) Precautions on using the advanced alarm popup display
When [Display Position Switching] is set to [Switch] in the advanced alarm popup display setting, set either of
the following for the utility call key.
• Setting the position of the utility call key to the upper-right or lower-left corner
• Setting [Pressing Time] of the utility call key to 1 or more seconds
When [Pressing Time] is set to 0 and the key position is set to the lower-left corner, the operation is as
described below.
If the positions of the key and the advanced alarm popup display overlap, the utility screen appears by
switching the display position of the advanced alarm popup display.
For the advanced alarm popup display, refer to the following.
(3) When limiting the display and operation of the utility
When limiting the display and operating users, set a password to the GOT using the GT Designer3.
If a user tries to display the main menu of the utility, the password is displayed.
Refer to the following for details on setting passwords.
11 - 24
11. DISPLAY AND OPERATION SETTINGS (GOT SET UP)
11.3 Operation Settings (Settings Regarding Operation)
10.3.1 Display operation of main menu
GT Designer3 Version1 Screen Design Manual (Functions)
GT Designer3 Version1 Screen Design Manual (Fundamental)
1.
●
Touch or
the setting screen.
The button repeats
touch.
Set the corner to be set to a key position to
For the key position, 0 or 1 point only can be set.
2.
When setting 1 point, specify the time to switch to
the utility in case of keeping pressing the key
position.
Touch the time input area.
3.
Touching the input area displays a keyboard.
Input numerical value from the keyboard.
4.
If touch the [OK] button, the changed settings are
reflected and the screen returns to the [Operation]
screen.
If touch the [Cancel] button, the changed settings
are canceled and the screen returns to the
[Operation] screen.
5.
In the [Operation] screen, touching the [OK]/
[Cancel]/ button restarts and operates the GOT
with the changed settings.
displayed at the 4 corners of
●
with every
●
.