Accessing By Gx Works2 - Mitsubishi Electric GT16 User Manual

31.6.4 Accessing by GX Works2

The following shows the procedure to set the FA
transparent function of GX Works2.

When connecting the GOT and PC with USB
(1) Connecting the GOT and PLC in direct connection
(a) Connecting to QCPU (Q mode)
1.
Click the Connection Destination view
Destination] [(Connection target data name)] in the
Navigation window of GX Works2.
2.
The [Transfer Setup] is displayed.
3.
Set the [Transfer Setup]:
PC side I/F : Serial USB
PLC side I/F : GOT
Other station : No specification
4.
Double-click [Serial] of the PC side I/F to display [PC
side I/F Serial setting].
5.
Check the following for [PC side I/F Serial setting].
When connecting the GOT and PC with USB
Mark the [USB] checkbox.
31 - 40
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
6.
Double-click [GOT] of the PLC side I/F to display
[PLC side I/F Detailed Setting of GOT].
7.
Check-mark either of the following in [PLC side I/F
Detailed Setting of GOT].
[Connection
Mark the [via GOT(direct coupled) transparent mode]
checkbox.
8.
The screen returns to [Transfer Setup]. Click
[Connection Test] to check if GX Works2 has been
connected to the QCPU (Q mode).
Direct CPU connection