Table of Contents
Advertisement
(3) When touching special function switch (utility)
If you touch the special function switch (utility) while user-created screen is displayed, the main menu is
displayed.
The special function switch (utility) can be set as a touch switch that is displayed on a user-created screen by
GT Designer3.
Special function switch
For the details of the special function switch, refer to the following.
(4) When powering ON the system
The main menu is displayed after pressing the S-mode switch while the [Booting...] message which appears
immediately after powering up is displayed.
If the S-mode switch is pressed before the display of the [Booting...] message, the OS installation function starts.
Therefore, press the S-mode switch after the [Booting...] message is displayed.
GOT power supply ON
Press the S-mode switch during
[Booting...] message display.
POINT
POINT
POINT
When limiting the display and operation of the utility
When limiting the display and operating users, set a password to the GOT using the GT Designer3.
If a user tries to display the main menu of the utility, the password is displayed.
Refer to the following for details on setting passwords.
10 - 8
10. UTILITY FUNCTION
10.3 Utility Display
(Utility)
GT Designer3 Version1 Screen Design Manual (Functions)
Booting...
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Main menu
Main menu
Advertisement
Chapters
Table of Contents
