Connection Diagram; Cable - Mitsubishi Electric GT16 User Manual

39.3 Connection Diagram

The following diagram shows the connection between the
GOT and the PLC.
39.3.1 RS-232 cable

Connection diagram
RS232 connection diagram 1)
Connector conversion
box
side
CD
1
RD(RXD)
2
SD(TXD)
3
ER(DTR)
4
SG
5
DR(DSR)
6
RS(RTS)
7
CS(CTS)
8
NC
9
FG
-
*1 Connect FG grounding to the appropriate part of a cable
shield line.

Precautions when preparing a cable
(1) Cable length
The total distance (between GOT and controllers) of
RS-232 cable must be 6m or less.
(2) Connector conversion box side connector
For the Connector conversion box side connector, refer
to the following.
6.7 Connector Conversion Box
(3) Shinko Technos indicating controller side connector
Use the connector compatible with the Shinko Technos
indicating controller side.
For details, refer to the user's manual of the Shinko
Technos indicating controller.
39 - 4
39. CONNECTION TO SHINKO TECHNOS INDICATING CONTROLLER
39.3 Connection Diagram
Indicating
controller side
COM
TX
RX
*1