Personal Computer Side Setting; Accessing By Gx Works3 - Mitsubishi Electric GT16 User Manual

31.6 Personal Computer Side Setting

31.6.1 Accessing by GX Works3

The following shows the procedure to set the FA
transparent function of GX Works3.

When connecting the GOT and personal
computer with USB
(1) Connecting the GOT and PLC in Ethernet
connection
(a) When connecting to RCPU
1.
Click [Online] Connection Destination] on GX
Works3.
2.
[Connection Channel Setup] is displayed.
3.
Set [Connection Channel Setup].
PC side I/F : USB
PLC side I/F : GOT
Other station : No Specification
4.
Double-click [GOT] of the PLC side I/F to display
[PLC side I/F Detailed Setting of GOT].
5.
On the [PLC side I/F Detailed Setting of GOT], mark
the [via GOT (Ethernet) transparent mode] checkbox
and click [Setting].
6.
By clicking [Setting], the [GOT (Ethernet) Transparent
Setting] is displayed.
Here, set the built-in Ethernet port CPU or Ethernet
module, which is firstly connected via a GOT.
7.
Set [RJ71EN71] for [PLC Type].
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
28
29
30
31
32
33
34
35
31 - 29