Connecting To Connection Cable; Connecting To Rack Type Host Link Unit - Mitsubishi Electric GT16 User Manual

33.2.15 Connecting to connection cable


Device settings
Write the following set values to devices of each PLC
CPU and initialize each port using a peripheral tool or
DM monitor.
Device name
DM6650
b15 to b8
2)
1) RS-232C port transmission speed setting
02 : 4800bps
H
03 : 9600bps
H
04 : 19200bps
H
DM6651
2) RS-232C port communication frame format
03 (fixed): The settings are:
H
DM6652
*3
DM6653
*1 Only transmission speeds available on the GOT side are
shown.
*2 Set the same transmission speed of the peripheral port as
that of the GOT side.
*3 Set the peripheral port host link station No. according to the
Host Address on the GOT side.
HINT HINT HINT
Precautions for changing device values
Before changing the device values, make sure that the
switch settings have been changed as follows:
CPM2A:
The communication condition switch to "individual"
CPM2C:
The communication port function switch to "OFF"
Set value
0001 (fixed)
H
b7 to b0
1)
*1*2
Start bit : 1 bit
Data length: 7 bits
Stop bit : 2 bits
Parity : Even bits
0000 (fixed)
0000 to 0031
33.2.16 Connecting to rack type host
link unit

Switch setting on C200H-LK201-V1
Set the switches accordingly.
Front
LK201-V1
RUN XM
RCV
ERROR
(1) (1)
SW1 SW2
(2) (3)
SW4
SW3
(1) Setting Machine No. (SW1, SW2)
Set the Machine No. within the range of 00 to 31.
Set the station No. according to the Host Address on
the GOT side.
Rotary
switch
SW1
SW1 SW2
SW2
(2) Setting transmission speed (SW3)
Set the same transmission speed of the GOT.
Setting
4
SW3
5
6
*1 Only transmission speeds available on the GOT side are
shown.
33. CONNECTION TO OMRON PLC
33.2 Serial Connection
Rear
(4)
(5)
Description Settings
Machine No.
upper digit
0 to 3
1
(×10 )
Machine No.
lower digit
0 to 9
0
(×10 )
*1
Settings
4800bps
9600bps
19200bps
33 - 15
28
29
30
31
32
33
34
35