Table of Contents
Advertisement
6.
Double-click [GOT] of the PLC side I/F to display
[PLC side I/F Detailed Setting of GOT].
7.
Set the IP address and port No. in [Ethernet detail
setting for PC and GOT connection].
Set the IP address and port No. to the same as the
Ethernet download setting.
31.5.1 Setting communication interface
8.
Check either of the followings in [Detail setting for
GOT and PLC connection].
Direct CPU connection
Mark the [via GOT(direct coupled) transparent mode]
checkbox.
9.
The screen returns to [Transfer Setup]. Click
to check if GX Works2 has been
Connection Test
connected to the QCPU (Q mode).
31 - 48
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
(2) Connecting the GOT and PLC in computer link connection
(when connecting to QJ71C24 (N))
1.
Click the Connection Destination view
Destination]
[(Connection target data name)] in the
Navigation window of GX Works2.
2.
The [Transfer Setup] is displayed.
3.
Set the [Transfer Setup]:
PC side I/F
:Ethernet Board
PLC side I/F
:GOT
Other station
: No specification
4.
Double-click [Ethernet Board] of the PC side I/F to
display [PC side I/F Ethernet Board setting].
5.
Set the protocol to TCP. Network No. and Station No.
are not required to be changed (default) because they
are not used.
[Connection
Advertisement
Chapters
Table of Contents
