Example Of Operation Log Information Display - Mitsubishi Electric GT16 User Manual



Example of operation log information display

(9)
Number Item
(1) Drive
(2) Check box
(3) Kind
(4) Name
(5) Path name
(6) Size
(7) Creating date & time
(8) Select all files/Cancel selection
(9) Drive size
(10) Operation switch
(11) Number of folders and files
POINT POINT POINT
(1) About the displayed file
The files other than that for operation log are not displayed on the operation log information screen.
(2) Folders and files displayed
Refer to the following for the details of folders and files displayed.
15.1.4 Display file
(1) (2) (3) (4) (6)
(8) (10)
The target drive can be selected. (Even if CF card is not installed, this message appears.)
If the check box is selected, up to 512 files can be selected.
Indicates whether the displayed name is file or folder.
In case of file, displays the extension; in case of folder, displays "DIR".
Displays the file name or folder name.
For the long file/folder name, entire part may not be displayed.
Confirm the nondisplayed part with the [Rename] button, etc.
( 15.2.4 ■Operation log information operation (6)Rename operation)
After confirmation, touch the [Cancel] button to cancel the operation.
Displays the path name of drive/folder which is currently displayed.
Displays the size of the file displayed in Name.
The date and time when each file was created are displayed.
Multiple files can be selected or canceled at once.
Touch the [Select all files] button to select all files.
If the number of the displayed files exceeds 513, the first 512 files are selected.
Displays the used/entire size of drive selected by select drive.
Execution switch of each function.
Displays the total number of the displayed files and folders.
(5)
(7)
(11)
Description
15. DATA CONTROL
15.2 Various Data Control
9
10
11
12
13
14
15
16
15 - 45