Installing When Starting The Got - Mitsubishi Electric GT16 User Manual

16.3.1 Installing when starting the GOT

The displayed message is different depending on the installation condition of standard monitor OS. When the screen
requesting operation is displayed, operate the GOT according to the instructions on the screen.

Operation procedure
(1) When installing with CF card
1.
Power OFF the GOT, switch the CF card access switch to OFF, and install the CF card where the BootOS,
standard monitor OS or project data is stored in the CF card interface of the GOT.
2.
Switch ON the CF card access switch of GOT.
3.
Power on the GOT while pressing the install switch (S.MODE switch) on the back of the GOT. (1-point press
installation function)
4.
The BootOS or standard monitor OS is installed in the built-in flash memory.
The CF card access LED is lit during the install execution.
Do not pull out the CF card or power off the GOT while the CF card access LED is lit.
5.
The GOT restarts automatically after the installation is completed.
(When the standard monitor OS is already installed, the GOT restarts by touching the [OK] button.)
6.
After confirming normal restart, switch off the CF card access switch of the GOT.
Confirm that the card access LED is not lit, and remove the CF card from the CF card interface of the
GOT.
(2) When installing with USB memory
1.
Power off the GOT, and install the USB memory where the BootOS, standard monitor OS or project data is
stored in the USB interface of the GOT. The BootOS cannot be stored in the USB memory where the
standard monitor OS or project data is stored.
2.
Power on the GOT while pressing the install switch (S.MODE switch) on the back of the GOT. (1-point
press installation function)
3.
The BootOS and standard monitor OS are installed in the built-in flash memory.
The USB memory access LED is lit during the installation execution.
Do not pull out the USB memory or power off the GOT while the USB memory access LED is lit.
16. INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS
16.3 BootOS and Standard Monitor OS Installation Using CF Card or USB Memory
Now installing BootOS.
Reboot.
Now installing BootOS.
9
10
11
12
13
14
15
16
16 - 5