Accessing Plc By Gx Configurator-Qp - Mitsubishi Electric GT16 User Manual

31.6.6 Accessing PLC by GX
Configurator-QP
The following shows the procedure to set the FA
transparent function of GX Configurator-QP.
1.
Click [Transfer setup] for [Online] on GX Configurator-
QP.
2.
The [Transfer Setup] is displayed.
3.
Set the following in [PC side] in [Transfer setup].
When connecting the GOT and PC with USB
Interface: USB
31 - 50
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
4.
Set the [PLC side] in [Transfer setup].
PLC type: Q series PLC type
Multi PLC specification: None/No.1 to 4
Mark the [via GOT transparent mode] checkbox.
Direct CPU connection
Interface: PLC
Type: Direct coupled
Computer link connection
Interface: C24
5.
Set the [Module connecting I/O address] in [Transfer
setup].
Specify the actual I/O address of the module.
6.
The screen returns to the [Transfer setup]. Click the
[Connection Test] to check if GX Developer has been
connected to the QD75***(QnCPU).