Mitsubishi Electric GT16 User Manual page 224

(2) Operation to restore data
13 - 22
13. DEBUG
13.3 Memory/Data Control
1.
To restore data in the SRAM user area to a drive
Select the drive where the data is stored, and then
touch the [Restoration] button.
2.
The dialog box shown left appears.
Check the description of the dialog box. To restore all
data in the SRAM user area, touch the [OK] button.
To cancel the restoration, touch the [Cancel] button.
3.
When touching the button in
shown left appears for recheck.
To start the restoration, touch the [OK] button.
To cancel the restoration, touch the [Cancel] button.
4.
The completion dialog box appears when the
restoration is completed.
To close the dialog box and restart the GOT, touch
the [OK] button.
, the dialog box