41.3.4 Precautions
Delay of device communication
Note that if a non-existent station, or a station which
power is turned OFF is monitored, the communication
of normal stations is also delayed.
Reduntant system
When configuring a redundant system, the "Multicast
address setting" for the configured PLC pair (System A:
Primary, System B: Secondary) is required.
41.4 Device Range that Can Be Set
For details on the device range of controllers that can be
used on GT16 Handy, refer to the following manuals.
GT Designer3 Version1 Screen Design Manual
(Fundamentals)
GOT1000Series Connection Manual
(Non-Mitsubishi Products 1) for GT Works3
41 - 10
41. CONNECTION TO TOSHIBA PLC
41.4 Device Range that Can Be Set