Mitsubishi Electric GT16 User Manual page 196

2.
When the registration is selected or the [Regist] key is touched on a PLC not compatible with the customer keyword,
the keyboard for the keyword input is displayed in a pop-up window.
When the keyword is input and the [Enter] key is touched, registration is completed.
When [Keyword and Customer Keyword] is selected on the selection screen for the registration, the
Customer Keyword entry screen of
For the keyword, 8 digits from 0 to 9 or A to F must be set.
Target PLC
FX PLC compatible with 2nd
*1
keyword
FX PLC not compatible with
*1
2nd keyword
*1 For details on FX PLC compatible with 2nd keyword, refer to the following.
*2 [Registration options]
Options can be selected among "Read/Write Protect", "Write Protect", or "All Protect".
For access restrictions of each setting, refer to the manual of the PLC to be used.
3.
When [Keyword and Customer Keyword] is selected on the selection screen for registration and the keyword input
is completed, the Customer Keyword registration screen is the displayed.
When the customer keyword is input and the [Enter] key is touched, registration is completed.
To set the customer keyword, 8 digits from 0 to 9 or A to F must be used.
12 - 12
12. COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
12.2 Communication Detail Setting
is displayed.
When keyword and 2nd keyword are registered
[Registration options]
FX series PLCs Manual
Settings
*2
can be selected.
-
When only keyword is registered
*2
[Registration options] cannot be selected.