Mitsubishi Electric GT16 User Manual page 842

37.4 GOT Side Settings
37.4.1 Setting communication interface
(Communication settings)
Set the channel of the equipment connected to the GOT.
2.
1.
Select [Common]
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: JTEKT
• Controller Type: JTEKT TOYOPUC-PC
• I/F: Interface to be used
• Driver: JTEKT TOYOPUC-PC
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
37.4.2 Communication detail settings
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be
confirmed in [I/F Communication Setting].
For details, refer to the following.
17.1.2 I/F communication setting
37 - 8
37. CONNECTION TO JTEKT PLC
37.4 GOT Side Settings
Click!
[Controller Setting] from the
37.4.2 Communication detail settings
Make the settings according to the usage environment.
Item
Transmission
Speed
3.
Data Bit
Stop Bit
4.
Parity
Retry
Timeout Time
Delay Time
Host Address
Format
POINT POINT POINT
(1) Format setting
The compatible format of PLC differs depending
on model.
PC2J, PC2JS, PC2JR, PC2JC, PC2J16P, PC2J16PR
PC3JG, PC3JG-P, PC3JD, PC3JD-C, PC3J, PC3JL
For details of PC3J extended function, refer to the
following manual.
JTEKT PLC user's manual
(2) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following.
12. COMMUNICATION INTERFACE SETTING
(COMMUNICATION SETTING)
(3) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
Description
Set this item when change the transmission speed
used for communication with the connected
equipment.
(Default:19200bps)
Set this item when change the data length used for
communication with the connected equipment.
(Default: 8bit)
Specify the stop bit length for
communications.(Default: 1bit)
Specify whether or not to perform a parity check,
and how it is performed during communication.
(Default: Even)
Set the number of retries to be performed when a
communication error occurs.
(Default: 0time)
Set the time period for a communication to time
out.(Default: 3sec)
Set this item to adjust the transmission timing of the
communication request from the GOT.(Default: 0)
Specify the host address (station No. of the GOT to
which the PLC is connected) in the connected
network.
(Default: 00)
Select the communication format.
(Default: 1)
format 1: PC3J extended function incompliant
format 2: PC3J extended function compliant
Model name
Range
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
7bits/8bits
1bit/2bits
None
Even
Odd
0 to 5times
3 to 30sec
0 to 300ms
00 to 37
(Octal)
1/2
Compatible format
Format 1 only
Format 1 or Format 2