System Configuration; Gx Works3, Cw Configurator, Gx Works2, Gx Developer, Gx Logviewer, Mx Component, Mx Sheet, Cpu Module Logging Configuration Tool, Setting/Monitoring Tool For C Controller Module - Mitsubishi Electric GT16 User Manual

31.4 System Configuration

31.4.1 GX Works3, CW Configurator, GX Works2, GX Developer, GX LogViewer,
MX Component, MX Sheet, CPU Module Logging Configuration Tool,
Setting/Monitoring tool for C Controller module

When connecting the GOT and PC with USB
PLC
Varies according to
the connection type.
PLC
Connection type
For the system configuration between
the GOT and PLC, refer to the following.
DIRECT CONNECTION TO CPU
COMPUTER LINK CONNECTION
ETHERNET CONNECTION
GOT MULTI-DROP CONNECTION
*1 GX Works3, CW Configurator, GX LogViewer, MX Component, MX Sheet, CPU Module Logging Configuration Tool and Setting/
Monitoring tool for C Controller module are not supported.
*2 CW Configurator, not applicable to Setting/Monitoring tool for C Controller module.
31 - 18
31. FA TRANSPARENT FUNCTION
31.4 System Configuration
GOT
Connection cable
GOT
Model Interface Cable model
*2
GT09-C30USB-5P(3m)
USB
*2
GT09-C20USB-5P(2m)
*1
PC
Connection cable
Max. distance
3m
Communication driver
Connection type
dependant
Personal computer
Software
GX Works3
CW Configurator
GX Works2
GX Developer
GX LogViewer
MX Component
MX Sheet
CPU Module Logging
Configuration Tool
Setting/Monitoring tool for C
Controller module
Number of
connectable
equipment
1 personal
computer
for 1 GOT