Mitsubishi Electric GT16 User Manual page 1044

POINT POINT POINT
(1) Format setting
The compatible format of control equipment differs
depending on model.
Model name
SDC20/21, SDC30/31, SDC40A/40B/40G,
CMS, CMF, CML, MQV, MPC, MVF,
PBC201-VN2, RX
DMC10, SDC15, SDC25/26, SDC35/36,
SDC45/46, AUR350C, AUR450C,
CMC10B
DMC50, AHC2001
For the continuous access and random access of
the control equipment, refer to the following
manual.
User's Manual of the AZBIL control equipment
(2) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following.
12. COMMUNICATION INTERFACE SETTING
(COMMUNICATION SETTING)
(3) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
52 - 18
52. CONNECTION TO AZBIL CONTROL EQUIPMENT
52.4 GOT Side Settings
Compatible format
Format 1 only
Format 1 or Format 2
The format setting is invalid.